1/1
7 files

Copper-alloy work box

online resource
posted on 26.10.2021, 19:41 by Helena HamerowHelena Hamerow
Cylindrical bronze work box, length 6.6cm, diam. 2.5cm. Body made of sheet metal rolled with edges overlapping. Bottom missing. Lid made of bronze disc with another strip for sides once braised on: it fitted tightly over top of cylinder. On bottom of lid a bronze staple, and 2 more, possibly originally 3 but one now missing, were affixed on sides just below lid edge. One chain was attached to lid, the other 2 or three to the staples at sides, and all joined to a wire ring with twisted knot. This ring has remains of three chains, and also a figure-of-eight wire loop, which Faussett's drawing shows as additional to the four original chains. Presumably he is correct. The staples are made of wire, with ends passing through sheet metal and hammered over like paper clips at back. The chains have wire S-links. The whole mechanism was designed to suspend vertically and permit lid to be taken off and also remain suspended.

History

Grave ID

Kingston Down Grave 222

Object ID

M6340

Catalogue Number

M 6340

Material

copper alloy (Sonia Hawkes Material Notes; bronze) (Antiquarian Material; brass)

Complete Keyword List (Including Alternatives)

work box (Sonia Hawkes Keyword; work box) (Antiquarian Keyword; cylinder)

Status

extant

Location

National Museums Liverpool

Collection

Mayer Collection

Original Collection

Faussett

Category ID

textile

Usage metrics

Categories

Exports